Vertical Blinds - Mounting Instructions

Inside Mount Blinds (IB)

1. Properly secure mounting clips with screws (not included) to the inside top of the window frame. The long side of the clip should go toward the window.

2. Cut the corners of the valance top (NOT the valance front) so that the valance top fits inside the window frame.

3. Cut slots in the valance top, at the mounting clip locations, so that the valance top can be slid into the window frame and avoid the mounting clips.

4. Place the head rail edge into the short side of the clip and snap the backside of the head rail into the clip.

5. Slide the valance into the window frame between the head rail and the top of the window as shown (fig 1)

6. Place the valance corners on each end of the valance.

7. Place the valance returns on the valance corners. (note: you may have to cut the length of the valance return)

8. Snap the vanes into each clip in the head rail.

Outside Mount Blinds (OB)

1. Properly secure mounting brackets with screws (not included) to the wall above the window frame.

2. Place the head rail edge into the short side of the clip, on the mounting bracket, and snap the backside of the head rail into the clip.

3. Slide the valance into the valance clips on the top of the mounting bracket as shown (fig 2)

4. Place the valance corners on each end of the valance.

5. Place the valance returns on the valance corners. (note: you may have to cut the length of the valance return)

6. Snap the vanes into each clip in the head rail.

PARTS LIST

1. Head rail

2. Valance

3. Valance returns

4. Valance corners

5. Mounting clip (inside mount only)

6. Mounting bracket (outside mount only)